D5PF788M0M3Y9 [TAIYO YUDEN]

Duplexer,;


型号：	D5PF788M0M3Y9
厂家：	TAIYO YUDEN (U.S.A.), INC
描述：	Duplexer,
文件：	总11页 (文件大小：585K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Notice for TAIYO YUDEN productsꢀ

Please read this notice before using the TAIYO YUDEN products.

REMINDERS

■ Product information in this catalog is as of October 2015. All of the contents speciﬁed herein are subject to change

without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-

fore practical application or usage of the Products.

Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incor-

porating such products, which are caused under the conditions other than those speciﬁed in this catalog or indi-

vidual speciﬁcation.

■ Please contact TAIYO YUDEN CO., LTD. for further details of product speciﬁcations as the individual speciﬁcation

is available.

■ Please conduct validation and veriﬁcation of products in actual condition of mounting and operating environment

before commercial shipment of the equipment.

■ All electronic components or functional modules listed in this catalog are developed, designed and intended for

use in general electronics equipment.(for AV, office automation, household, office supply, information service,

telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any

equipment in the ﬁeld such as transportation,( automotive control, train control, ship control), transportation signal,

disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have

direct inﬂuence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in ad-

vance.

Do not incorporate the products into any equipment in ﬁelds such as aerospace, aviation, nuclear control, subma-

rine system, military, etc. where higher safety and reliability are especially required.

In addition, even electronic components or functional modules that are used for the general electronic equipment,

if the equipment or the electric circuit require high safety or reliability function or performances, a sufﬁcient reliabil-

ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to

install a protective circuit is strongly recommended at customer's design stage.

■ The contents of this catalog are applicable to the products which are purchased from our sales ofﬁces or distribu-

tors (so called“TAIYO YUDEN’s ofﬁcial sales channel”).

It is only applicable to the products purchased from any of TAIYO YUDEN’s ofﬁcial sales channel.

■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may

occur in connection with a third party's intellectual property rights and other related rights arising from your usage

of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.

■ Caution for export

Certain items in this catalog may require speciﬁc procedures for export according to“Foreign Exchange and For-

eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.

Should you have any question or inquiry on this matter, please contact our sales staff.

SAW/FBAR DEVICES for MOBILE COMMUNICATIONS

REFLOW

■PARTS NUMBER

(A) Previous Rule (applied products registered on March 31, 2010 or before.)

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

⑫

①Family

④Package code

⑤Product code

⑥Common sign

⑦Frequency

②Common sign

③Series name

Code

Product

Frequency Range［MHｚ］

700 - 1000

Duplexer

⑧Common sign

⑨Internal code

⑩Internal code

⑪Custom code

⑫Packaging

1000 - 5000

700 - 1000

Dual Duplexers

Device

700 - 1000

Device

1000 - 5000

700 - 1000

Dual Devices

1000 - 5000

(B) New Rule (applied to products registered on April 1, 2010 or later.)

①

②

③

④

⑤

⑥

⑦

⑧

①Series name

②Package code

③Product code

④Frequency

Code

Product

Duplexer

Frequency Range［MHｚ］

700 - 1000

1000 - 5000

700 - 1000

Dual Duplexers

Device

⑤Internal code

⑥Internal code

⑦Custom code

⑧Packaging

700 - 1000

Device

1000 - 5000

700 - 1000

Dual Devices

1000 - 5000

*For further details, please contact to TAIYO YUDEN CO., LTD.

■EXTERNAL DIMENSIONS

2.5×2.0×0.6 (9pin)

2.0×1.6×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.8×1.4×0.5

1.5×1.1×0.5

▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspeciﬁcationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspeciﬁcation.ꢀ

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

151

■PARTS NUMBER

●Duplexers

System

Part number

Package Size［mm］ Insertion Loss［dB］

Isolation［dB］ Remarks

9 Pin, B Type Rx : Bal.100ohm

W-CDMA Band 1

D6PE2G140P3AW

D6DA2G140K2A4

D6RB2G140E1AJ

D6RB2G140E1AL

D6PF1G960M3B6

D6PF1G960M3B9

D6PE1G960P3BY

D6PE1G960P3BP

D6RB1G960E1HB

D6DA2G132K2D4

D6PE2G132P3DWB

D6RB2G132E1DF

FAR-D5PF-881M50-M3E7

FAR-D5PF-881M50-M3E9

FAR-D5PE-881M50-P3EZ

FAR-D5PE-881M50-P3EY

D5DA881M5K2E4

D5RB881M5E1BH

D6HL2G655DL06

D6HN2G655BN54

D5PF942M5M3G6

D5PF942M5M3G9

D5DA942M5K2G6

D5PE942M5P3GT

D5RB942M5E1CF

D5DA737M5K2H2

D5PE782M0M3P9

D5DA782M0K2J6

J5NA782M0P1H6

D5PF740M0M3R9

D5PE740M0P3NZ

D6PE1G503P3KW

D6HL1G962DL39

D5PF876M5M3U9

D5PE876M5P3UZ

D5PF773M0M3Y6

D5PF788M0M3Y9

D5PE878M0P3UT

2.0×1.6×0.5

1.8×1.4×0.5

1.8×1.4×0.44

2.0×1.6×0.57

1.8×1.4×0.6

1.8×1.4×0.5

2.0×1.6×0.5

1.8×1.4×0.5

2.0×1.6×0.5

1.8×1.4×0.5

1.8×1.4×0.47

2.0×1.6×0.54

2.0×1.6×0.5

1.8×1.4×0.5

2.0×1.6×0.5

1.8×1.4×0.5

2.0×1.6×0.5

1.8×1.4×0.5

2.5×2.0×0.6

2.0×1.6×0.5

2.0×1.6×0.57

2.0×1.6×0.5

1.5/1.6

1.8/1.8

1.7/1.8

2.2/2.7

2.0/3.1

2.3/3.0

2.1/2.9

1.5/1.7

1.8/1.8

1.6/1.8

1.5/1.8

1.4/1.7

2.1/2.3

1.8/2.6

2.1/2.1

1.9/2.2

1.7/1.8

1.7/2.2

1.5/1.9

1.65/1.65

1.6/2.0

1.65/1.65

1.6/1.9

1.6/1.8

1.9/2.0

1.6/2.0

2.4/2.9

2.0/1.9

2.2/2.6

1.8/2.3

1.8/2.4

1.9/2.2

59/47

56/51

57/48

57/51

55/52

57/52

57/53

56/52

56/55

57/55

55/50

62/54

58/51

59/52

58/59

58/52

53/57

55/42

57/55

60/52

58/59

58/54

56/51

63/58

53/64

63/58

60/53

50/50

63/60

55/56

56/56

50/50

60/49

60/53

60/54

59/51

8 Pin, B Type Rx : Bal.100ohm

9 Pin, B Type

PCS/W-CDMA Band 2

9 Pin, B Type

9 Pin, B Type Rx : Bal.100ohm

8 Pin, B Type Rx : Bal.100ohm

8 Pin B Type

W-CDMA Band 4

9 Pin, B Type Rx : Bal.100ohm

8 Pin B Type Rx : Bal.100ohm

9 Pin, A Type

CDMA/W-CDMA Band 5

9 Pin, B Type

9 Pin, B Type Rx : Bal.100ohm

9 Pin, A Type Rx : Bal.100ohm

8 Pin, B Type

8 Pin, B Type Rx : Bal.100ohm

9 Pin, B Type FBAR

LTE Band 7

9 Pin, B Type Bal.100ohm, FBAR WLAN coexistence Ver.

9 Pin, B Type for LTE

9 Pin, B Type

W-CDMA Band 8

8 Pin, B Type

9 Pin, B Type Rx : Bal.100ohm

8 Pin, B Type Rx : Bal.100ohm

8 Pin, B Type

LTE Band 12

LTE Band 13

9 Pin, B Type

8 Pin, B Type

LTE Band 13+17 Triplexer

LTE Band 17

9 Pin, B Type

9 Pin, B Type Rx : Bal.100ohm

9 Pin, B Type FBAR

LTE Band 21

LTE Band 25

LTE Band 26

9 Pin, B Type

9 Pin, B Type Rx : Bal.100ohm

Block A 9Pin, B Type

Block B 9Pin, B Type

9 Pin, B Type Rx : Bal.100ohm

LTE Band 28

CDMA BC0+BC10

●CDMA/GSM850/Band 5

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

CDMA Tx

FAR-F5KB-836M50-B4ER

FAR-F5KB-836M50-B4EG

F5QA836M5M2AR

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.7

1.6

1.9

1.5

1.4

1.5

1.7

1.6

1.3

1.7

1.3

100ohm input

200ohm input

High Att.

CDMA/GSM850 Tx

FAR-F5KA-836M50-D4DF

FAR-F5KB-881M50-B4ED

FAR-F5KY-881M50-B4UZ

FAR-F5KB-881M50-B4EJ

FAR-F5QB-881M50-P2BG

F5QG881M5P2KG

High Att.

CDMA/W-CDMA Band 5 Rx

100ohm output

100ohm, High Att.

200ohm output

100ohm output

100ohm, High Att., Low Loss

High Att.

GSM850/CDMA Rx

GSM850 Rx

FAR-F5KA-881M50-D4DB

FAR-F5QA-881M50-M2AF

F5QA881M5M2AU

Low Loss/high Att.

150ohm output

FAR-F5KB-881M50-B4EA

FAR-F5QB-881M50-P2BA

●CDMA2000 BC0+BC10

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

CDMA2000 BC0+10 Tx

F5KA833M0D4DU

F5KA833M0D4MG

F5KY878M0B4ND

1.4×1.0×0.5

2.3

1.4

2.1

High Att.

Low IL

CDMA2000 BC0+10 Rx

100ohm output

●GSM/EGSM/Band 8

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

EGSM Tx

FAR-F5KA-897M50-D4DC

FAR-F5KA-897M50-D4VW

F5QA897M5M2AC

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

2.2

2.6

2.3

2.0

1.6

2.4

1.6

1.9

2.0

2.2

High Att.

EGSM Rx

FAR-F5KA-942M50-D4DD

FAR-F5KB-942M50-B4EB

FAR-F5KB-942M50-B4ES

FAR-F5QB-942M50-P2BB

F5KA942M5D4MYB

High Att.

150ohm output

100ohm output

150ohm output

High Att.

W-CDMA/LTE Band 8

FAR-F5KY-942M50-B4UW

F5QG942M5P2KB

100ohm, High Att.

100ohm output for LTE

F5QG942M5P2KF

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

152

■PARTS NUMBER

●DCS/Band 3

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

DCS Tx

FAR-F6KA-1G7475-D4CY

F6QA1G747M2QS

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

2.5

2.1

1.5

1.8

1.6

2.0

3.0

3.2

DCS Rx

FAR-F6KA-1G8425-D4CK

FAR-F6KB-1G8425-B4GA

F6QB1G842P2BM

150ohm output

100ohm

F6QB1G842P2BF

150ohm

W-CDMA/LTE Band 3

F6QA1G842M2AN

Unbal.

F6KY1G842B4UM

100ohm, High Att.

100ohm output

F6QG1G842P2KD

●PCS/GSM1900/Band 2

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

US-PCS Tx

FAR-F6KA-1G8800-L4AF

FAR-F6KB-1G8800-B4GS

F6QA1G880M2AQ

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

2.4

2.3

1.7

3.4

2.8

2.1

2.9

2.8

2.0

1.6

1.5

High Att.

100ohm input

US-PCS Rx

FAR-F6KA-1G9600-D4MT

F6QA1G960M2AP

High Att.

FAR-F6KB-1G9600-B4GP

FAR-F6KY-1G9600-B4UU

F6KY1G960B4NF

100ohm output

100ohm, High Att.

100ohm output

F6QG1G960P2KT

GSM1900/US-PCS Rx

GSM1900 Rx

FAR-F6KA-1G9600-D4CR

FAR-F6KB-1G9600-B4GB

F6QB1G960P2BK

150ohm output

●GSM Dual

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

GSM850+EGSM Rx

FAR-G5QC-942M50-N2FB

FAR-G5KT-942M50-Y4RW

FAR-G5KW-942M50-Y4YD

FAR-G5KC-942M50-Y4YW

FAR-G5QC-942M50-N2CD

FAR-G5KT-942M50-Y4RZ

FAR-G5QD-942M50-N2DB

FAR-G6QC-1G9600-N2FA

G6QJ1G960M2MB

1.5×1.1×0.5

1.8×1.4×0.5

1.5×1.1×0.5

1.8×1.4×0.5

1.5×1.1×0.5

1.8×1.4×0.5

1.5×1.1×0.5

1.8×1.4×0.5

1.5×1.1×0.5

1.8×1.4×0.5

1.5×1.1×0.5

1.5/1.8

1.9/2.2

2.5/1.8

1.8/1.4

1.7/1.4

2.2/1.9

2.5/2.0

1.9/1.7

1.9/1.9

1.8/2.0

1.8/1.9

1.9/1.8

1.6/1.6

2.0/2.3

1.9/1.8

2.2/3.1

2.5/2.5

2.2/2.2

1.6/1.4

50/29

50/25

32/38

31/54

29/51

25/52

25/55

17/13

19/19

18/13

18/14

14/16

13/15

22/25

13/18

13/15

18/13

31/14

14/54

GSM850 150ohm output EGSM 150ohm output

EGSM 150ohm output GSM850 150ohm output

DCS 150ohm output GSM1900 150ohm output

Rx Dual Unbal

GSM850+EGSM Rx（Common Input）

GSM850+EGSM Rx （Common Output）

EGSM+GSM850 Rx

EGSM+GSM850 Rx（Common Input）

DCS+GSM1900 Rx

DCS+GSM1900 Rx（Common Input）

GSM1900+DCS Rx

FAR-G6KT-1G9600-Y4RU

G6QD1G960N2DY

DCS 150ohm output GSM1900 150ohm output

1 IN 4 OUT 150ohm output

FAR-G6KC-1G9600-Y4YY

G6QC1G960N2CH

GSM1900 150ohm output DCS 150ohm output

Unbal 1in2out

GSM1900+DCS Rx（Common Input）

GSM1900+DCS Rx（Common Output）

G6QN1G960M2RE

FAR-G6KT-1G9600-Y4RY

FAR-G6KW-1G9600-Y4YC

G6QE1G960N2EC

GSM1900 150ohm output DCS 150ohm output

170ohm output for IMC

GSM1900 150ohm output DCS 150ohm output

GSM1900/DCS 150ohm output Low Loss

GSM1900 150ohm output GSM850 150ohm output

G6QE1G960N2EE

GSM1900+850 Rx

G6QF1G960N2GA

●GPS

System

GPS

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

FAR-F6KA-1G5754-L4AJ

F6QA1G575H2JF

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.1×0.9×0.44

0.9

0.96

Low loss, High Att.

100ohm, Low loss

100ohm, High Att.

FAR-F6KB-1G5754-B4GE

FAR-F6KB-1G5754-B4GU

FAR-F6KA-1G5859-D4MS

F6QA1G585M2AT

1.1

1.2

GPS/GNSS

1.0/1.2

1.1/1.4

1.5/1.7

1.6

FAR-F6KB-1G5859-B4HR

F6QB1G585P2BQ

100ohm output

GPS+GLONASS+Galileo+Compass

F6KA1G581D4JR

F6QA1G581M2QZ

1.1/1.4

1.2/1.8

1.7

F6QA1G582H2JM

Ladder High Att.

100ohm output

F6BG1G582R6TT

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

153

■PARTS NUMBER

●W-CDMA

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

W-CDMA Band 1 Tx

FAR-F6KA-1G9500-D4DG

FAR-F6KB-1G9500-B4GJ

F6QA1G950M2AA

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.5×1.1×0.5

1.4×1.0×0.5

1.5×1.1×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.1×0.9×0.44

1.4×1.0×0.5

1.1×0.9×0.5

1.4×1.0×0.5

1.1×0.9×0.5

1.5×1.1×0.5

1.4×1.0×0.6

1.1×0.9×0.5

1.4×1.0×0.5

2.0×1.6×0.6

1.6

2.1

48/41

53/54

56/50

48/48

Low loss, High Att.

100ohm output

Low loss, High Att.

Unbal.

1.8

W-CDMA Band 1/4 Rx

FAR-F6KA-2G1400-D4CG

FAR-F6KB-2G1400-B4GC

FAR-F6KA-2G1400-D4DW

FAR-F6KY-2G1400-B4UY

F6QA2G140M2AM

1.9

1.7

100ohm output

High Att.

1.9

1.8

100ohm, High Att.

Unbal.

1.9

F6QG2G140P2KA

1.7

100ohm, High Att.

Rx Div Unbal.

W-CDMA Band 1+2 Rx

W-CDMA Band 2+1 Rx

W-CDMA Band 4 Tx

W-CDMA Band 5+8 Rx

G6QL2G140M2PA

1.9/3.0

3.2/2.3

1.5

G6QH2G140N2LP

2 (1.9G)100ohm out 1 (2G)100ohm out

FAR-F6KA-1G7400-D4DE

G5QH942M5N2LN

1.6/20

2.3/2.0

1.6

100ohm output

Unbal.

W-CDMA Band 8+5 Rx（Common Output） G5QT942M5N2VA

W-CDMA Band 7 Tx

F6KA2G535L4AM

W-CDMA/LTE Band 7 Rx

FAR-F6KY-2G6550-B4UN

F6QG2G655P2KE

2.8

100ohm. High Att.

Unbal.

2.5

W-CDMA Band 9 Tx

W-CDMA Band 9 Rx

LTE Band 12 Tx

FAR-F6KA-1G7675-D4CT

FAR-F6KB-1G8625-B4GT

F5KA707M5D4JW

F5KY737M0B4NN

1.8

2.1

100ohm output

Unbal.

1.6

LTE Band 12 Rx

LTE Band 13 Tx

1.4

100ohm output

Unbal.

FAR-F5KA-782M00-D4VP

F5QA782M0M2AZ

FAR-F5KY-751M00-B4UQ

F5QA751M0M2QM

FAR-F5KA-710M00-D4VQ

F5QA710M0M2AY

FAR-F5KY-740M00-B4UR

F5QG740M0P2KH

F5KA822M5D4VR

1.5

Unbal.

LTE Band 13 Rx

LTE Band 17 Tx

LTE Band 17 Rx

1.6

100ohm output

Unbal.

1.9

1.2

Unbal.

1.3

Unbal.

1.4

100ohm output

Unbal.

1.4

LTE Band 18 Tx

1.6

LTE Band 18+5 (BC0) Tx

LTE Band 20 Tx

F5KA832M0D4JS

1.5

Unbal.

F5KA847M0D4ML

F5KY806M0B4NE

1.7

Unbal.

LTE Band 20 Rx

2.5

100ohm output

Unbal.

F5QA806M0M2QE

F6KY1G503B4NS

2.7

LTE Band 21 Rx

1.4

100ohm output Low loss

Unbal.

F6QA1G503M2QF

F6QA1G882M2AS

F5QG876M5P2KQ

F5QA773M0M2QC

F5QA788M0M2QB

F5BA722M5M6UW

F6KA2G595A4VL

2.0

LTE Band 25 Tx

LTE Band 26 Rx

LTE Band 28 Rx

1.8

Unbal.

2.2

100ohm output

Block A

2.1

2.0

Block B

LTE Band 29 Rx

1.6

Unbal.

TD LTE Bnad 38 Tx

TD LTE Bnad 38 Rx

1.5

Input Powerꢀ+29dBm

F6QA2G595M2QK

F6KB2G595B4HS

1.9

2.6

150ohm output

F6QB2G595P2BS

Balanced 100ohm

TD LTE Band 38+40（Common output）

TD LTE Band 40 Tx

G6QE2G595N2EJ

2.9/2.8

2.3

Balanced 100ohm

F6HF2G350AF41

Input Power +29dBmꢀFBAR

TD LTE Band 40 Rx

F6QA2G350M2QA

F6KB2G350B4HT

2.2

2.7

150ohm output

F6KB2G350B4HTB

F6KA2G605A4LA

2.5

Balanced 100ohm

Band 41

2.4

Unbal High power design 2555-2655MHz BW100MHz

Unbal High power design 2496-2690MHz BW194MHz

F6HP2G593AP20

2.9

●Other

System

Part number

Package Size［mm］ Insertion Loss［dB］ Attenuation［dB］ Remarks

ISM900（B.W.26MHz）

TD-SCDMA/TD-LTE Band 34

TD-SCDMA/TD-LTE Band 39

TD-SCDMA Band 34+39

FAR-F5QA-915M00-M2AK

FAR-F6KA-2G0175-D4DR

FAR-F6KA-1G9000-D4DS

G6QJ2G017M2MD

1.1×0.9×0.5

1.4×1.0×0.5

1.5×1.1×0.5

1.4×1.0×0.5

1.4×1.0×0.6

1.8

High Att

1.6

1.3/1.4

1.8/1.8

1.6/2.0

1.5/1.8

1.7/2.0

2.2/1.8

2.6

2 IN/2 OUT

G6QE2G017N2EU

Balanced 100ohm

1 IN/2 OUT

G6QN2G017M2RD

G6QN2G017M2RF

1 IN/2 OUTꢀGood Shape Factor

Balanced 100ohm

Balanced 200ohm

+10dBm

TD-SCDMA Band 39+34（Common input） G6QD2G017N2DU

TD-SCDMA Band 34+39（Common input） G6QD2G017N2DC

Wireless LAN

FAR-F6KA-2G4418-D4CU

FAR-F6KA-2G4418-A4VA

FAR-F6KA-2G4500-A4VD

F6KA2G436A4VE

3.0

+23dBm

1.9

Low IL,+19dBm

2.5

BW=72MHz,+24dBm

BW=68MHz,+24dBm

2402.5-2481.5MHz Input Power +28dBm FBAR

F6KA2G466A4VJ

2.8

F6HF2G441AF46

1.6

ꢀ

Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ

154

MULTILAYER EMI SUPPRESSION FILTERS

■PACKAGING

①Minimum Quantity

●Taped package

Standard Quantity [pcs]

Thickness

mm（inch）

1.0（0.039）

Type

Embossed tape

3000

FK 2125（0805）

②Tape material

●Embossed Tape

Top tape

Sprocket hole

Chip cavity

Base tape

Chip filled

Chip

③Taping dimensions

●Embossed tape 8mm wide

Chip cavity

Insertion pitch

Tape thickness

Type

1.5±0.2

2.3±0.2

4.0±0.1

2.0 max.

0.3 max.

FK 2125（0805）

（0.059±0.008）

（0.091±0.008）

（0.157±0.004）

（0.079 max.）

（0.012 max.）

Unit : mm（inch）

④Leader and Blank portion

Blank portion

Chip cavity

Blank portion

Leader

100mm or more

160mm or more

(3.94inches or more)

(6.3inches or more)

400mm or more

(15.7inches or more)

Direction of tape feed

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

emifilter_pack_e-E02R01

⑤Reel size

φ178±2.0

φ50min.

φ13.0±0.2

φ21.0±0.8

2.0±0.5

1.0

2.5max.

10±1.5

Unit：mm

⑥Top tape strength

The top tape requires a peel;-off force of 0.1～0.7N in the direction of the arrow as illustrated below.

Pull direction

0～15°

Top tape

Base tape

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

emifilter_pack_e-E02R01

Filter

■RELIABILITY DATA

1. Terminal stregth

Specified Value

No damage to be found.

Bending Test.

according to IEC60068-2-21(JISC60068-2-21)

Test Methods and

Remarks

2. Mechanical shock

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and Apply 14700m/s²for 0.5ms 5 times for each of 6 directions.

Remarks

according to IEC68-2-27(JISC60068-2-27).

3. Vibration

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s²of acceleration at 55 to 500Hz, apply a

Remarks

vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)

4. Drop 1

Specified Value

After testing, meet the specified characteristics at a room temperature.

Drop 3 times onto concrete floor from the height of 1.0m.

Test Methods and

Remarks

5. Drop 2

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.

6. Temperature cycling

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Temp. range －40 to ＋100℃. 500cycle.

７. Static humidity

Specified Value

After testing, meet the specified characteristics at a room temperature.

＋85℃, 90% to 95%RH, apply DC5V, 1000hours.

Test Methods and

Remarks

8. High temperature storage life

Specified Value

After testing, meet the specified characteristics at a room temperature.

＋100℃, 1000hours.

Test Methods and

Remarks

9. Low temperature storage life

Specified Value

After testing, meet the specified characteristics at a room temperature.

－40℃, 1000hours.

Test Methods and

Remarks

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E02R01

10. Solderbility 1

Specified Value

More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks

Lead-free Solder paste, Reflow；Peak temperature 245℃

11. Solderbility 2

Specified Value

More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks

Sn-Pb Solder paste, Reflow；Peak temperature 235℃

12. Solder heat resistance

After testing, meet the specified characteristics at a room temperature.

Specified Value

A change of the remarkable appearance do not have it.

◆Recommended temperature profile of reflow soldering

Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.

Suitable condition for solder heating is differed depending on composition and manufacturing method.

Please contact to solder manufacturer for the details.

Test Methods and

Remarks

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E02R01

Duplexer

■RELIABILITY DATA

1. Terminal stregth

Specified Value

No damage to be found.

Bend width 4mm, hold for 5±1 sec.

according to IEC60068-2-21(JISC60068-2-21)

Test Methods and

Remarks

2. Mechanical shock

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and Apply 14700m/s²for 0.5ms 5 times for each of 6 directions.

Remarks

according to IEC68-2-27(JISC60068-2-27).

3. Vibration

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s²of acceleration at 55 to 500Hz, apply a

Remarks

vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz)

4. Drop 1

Specified Value

After testing, meet the specified characteristics at a room temperature.

Drop 3 times onto concrete floor from the height of 1.0m.

Test Methods and

Remarks

5. Drop 2

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m.

6. Temperature cycling

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

Temp. range －40 to ＋100℃. 500cycle.

７. Static humidity

Specified Value

After testing, meet the specified characteristics at a room temperature.

＋85℃, 90% to 95%RH, apply DC5V, 1000hours.

Test Methods and

Remarks

8. High temperature storage life

Specified Value

After testing, meet the specified characteristics at a room temperature.

＋100℃, 1000hours.

Test Methods and

Remarks

9. Low temperature storage life

Specified Value

After testing, meet the specified characteristics at a room temperature.

－40℃, 1000hours.

Test Methods and

Remarks

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E02R01

10. High Temperature Bias

Specified Value

After testing, meet the specified characteristics at a room temperature.

Test Methods and

Remarks

＋50℃, ＋29dBm, 50000hours.

11. Solderbility 1

Specified Value

More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks

Lead-free Solder paste, Reflow；Peak temperature 245℃

12. Solderbility 2

Specified Value

More than 90% of area of terminals to be covered with the solder.

A change of the remarkable appearance do not have it.

Test Methods and

Remarks

Sn-Pb Solder paste, Reflow；Peak temperature 235℃

13. Solder heat resistance

After testing, meet the specified characteristics at a room temperature.

Specified Value

A change of the remarkable appearance do not have it.

◆Recommended temperature profile of reflow soldering

Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu.

Suitable condition for solder heating is differed depending on composition and manufacturing method.

Please contact to solder manufacturer for the details.

Test Methods and

Remarks

▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .

sawfilter_reli_e-E02R01

D5PF788M0M3Y9 [TAIYO YUDEN]

相关型号：

D5PF788M0M3Y9-Y

D5PF788M0M3Y9-YA

D5PF788M0M3Y9-ZA

D5PF876M5M3U9-Z

D5PF942M5M3G9

D5PF942M5M3G9-Z

D5RB942M5E1CF-Z

D5S4M

D5S6

D5S6M

D5S9

D5S9990-16300FT-G